• Aluminum Casting Components Manufacturing

    Cast aluminium alloy enclosures/Flanges/Conductors for HV GIS Terminations、HV Transformers、HV cable accessories substation、power plant、power transmission...

    Aluminum Casting Flanges / caps for GIS terminations 110 kV
    Aluminum Casting flange and AL alloy parts with anodized(anodizing) Sand blasting surface treatment，Aluminum accessories machining company in China
    Aluminum die Casting flange and Cap for HV Surge Arresters with Shot Blasting and CNC Machining，HV lightning Arresters aluminum Casting bottom bracket manufacturer
    Aluminium casting flanges supplier in Outdoor terminations 110 kV MKB 126 / 145 / 170 with silicone type insulator uses for the connection of cable line with other elements of power supply systems
    Aluminium casting top and bottom flanges glued and sealed to the silicone insulator in outdoor Terminations
    Aluminium die casting top and bottom cap&Flanges fittings for Dry type termination MKBC 126 / MKBC 145 uses for the connection of HV cable lines with overhead lines of substation equipment.
    Aluminium forging and Casting flanges for outdoor Joints 110 kV， MCB 126 / 145 is designed to connect two XLPE 64/110 kV high voltage cables. Joint MCB 126 / 145 could be produced in di�erent constructions which give the possibility of screen wires direct connection, cross-bonding connection of di�erent cable phase wires screen (screen transition), wires screen connection with optical fibers in the metal tubes (modules).
    Aluminium Casting parts in LW28 (A) TYPE 72.5-550 SF6 DEAD TANK CIRCUIT BREAKER
    Aluminium cast Flanges for Raychem Outdoor Termination OHVT System in high voltage cables up to 245 kV from TE Connectivity
    aluminium gravity die casting flange bracket for transformer and HIGH voltage bushings and outdoor terminations
    aluminium low pressure die casting flanges for HV Oil-impregnated paper capacitance type composite bushing
    Wall bushings are designed to lead the electrical current through walls. These bushings are available from 24 kV to 245 kV in the most common current ratings. The external insulation is available in porcelain as well as composite.
    BLUE INSTRUMENT TRANSFORMERS flange manufacturer,Steel/stainless/metal/ALuminum casting material
    station service transformers aluminum die casting flange manufacturers, transformer metal parts suppliers
    SF6 INSULATED VOLTAGE TRANSFORMERS stainless steel metal parts manufacturer
    SPECIAL INSTRUMENT TRANSFORMER aluminium low pressure die casting factory
    aluminium pressure die casting products for SPECIAL INSTRUMENT TRANSFORMER
    flange in Blue Instrument Transformers/Capacitive Voltage Transformer/ Combined Transformer/Current Transformer/GIS Instruments Transformers/Power Voltage Transformer/Special Instrument Transformer/Voltage Transformer
    Aluminum enclosures/outer shell/shields in CAPACITIVE VOLTAGE TRANSFORMERS, COMBINED TRANSFORMER, OIL INSULATED COMBINED INSTRUMENT TRANSFORMERS, SF6 INSULATED COMBINED INSTRUMENT TRANSFORMERS,
    Aluminum flange for Transmission Line Surge Arresters
    CNC precision machining parts manufacturer, CNC turning parts, CNC milling parts, surface grinding, CNC engraving
    metal cast parts supplying,precision machining parts. CNC Precision Machining Metal parts plant OEM service
    OEM Ductile iron sand castings, lost foam casting, Vacum Moulding,castings products are used for valves, hydrants, pumps,trucks,railway and train
    The aluminum used in casting aluminum is called: cast aluminum alloy.Common methods of aluminum casting are: sand casting, die casting, low pressure casting, precision casting, permanent mold casting suppliers
    casting production craft and machining equipments, such as resin sand ,sand mould , hot core boxes , lost-wax , lost foam cast production line
    pure aluminum or aluminum alloy ingot prepared according to the standard composition ratio, after artificial heating into aluminum alloy liquid or molten state and then through the professional mold or the corresponding process of aluminum liquid or molten aluminum alloy pouring into the cavity, after cooling to form the required shape of aluminum parts.
    flanged joint/Enclosures manufacturer gas-tight in SF6 INSULATED SWITCHGEAR HGIS switch equipments
    Aluminum Low Pressure Cast manufacturing ltd, Pressure Casting Mould , Die Cast Auto Parts plant with ADC12, ZL101, ZL102,A380, AlSi9Cu3, AlSi12(Fe) material
    Aluminum flange in Oil-Impregnated Paper Bushings/Resin-Impregnated Paper Bushings/Resin-Impregnated Synthetic Bushings
    Corona shields and Aluminium enclosures use for Transformers GIS and AIS manufacturing
    Aluminum cast products,The metal liquid generally injected into the gate by manual. Full of cavity depend on weight of liquid metal, exhaust, cool, open mould and get products.
    Gis Zz008 Copper Electrical Parts Copper Electrical Accessories manufacturer
    aluminum gravity casting: 1. Less casting porosity, heat treatment can be performed. The strength of the product can be improved greatly after heat treatment, better than die casting parts. 2. Product density is low, molding depend on the liquid weight, the density of the product is lower than die casting parts, its strength is slightly worse, but the elongation is higher. 3. The product surface finish is not high. Easy form similar blasting pit on the surface of casting products after cooling contraction. 4. Slow filling and low production efficiency, the production efficiency is only about a quarter compare the high pressure casting, caused the product cost is high. 5. Mould life is longer than die casting mould, and mould cost is low also.
    Alloy Die Casting Factory Aluminum Die Casting Parts Process Tooling fabrication,Aluminium die casting,cnc machining,threading,sand blasting,surface treatment,assembing,packing
    Cast Aluminum Alloy Low Pressure Die Casting Parts Pressure Casting Process,Low Density Low Pressure Die Casting Good Corrosion Resistance OEM/ODM supplier
    Aluminum Alloy Vacuum Die-Casting Next: Gravity Casting Aluminum Part manufacturing ldt,AL alloy base plate metallic fittings corrosion resistant for high voltage outdoor Terminations 245kv
    The die cast aluminum alloy connector with special material after heat treatment has higher mechanical properties and resistance to alternating stress.
    Aluminum Casting Flange. These are broadly utilized in various industrial application. Our provided Aluminum Casting Flange is fabricated by implementing supreme quality materials in total adherence with set industry norms.
    aluminium or Copper cable lugs for high voltage outdoor Terminations 245kv
    cable lugs manufacturer with aluminium alloy and copper,with mechanical with defined torque and crimp octant hexagonal for TE OHVT high voltage outdoor Terminations 245kv
    Corrosion Resistant Lightweight Aluminium Die Cast Components,Low Pressure Corrosion Resistant OEM Aluminum Die Casting Parts
    Die Casting Aluminum ABB Knorr Flange,designing and manufacturing medium and large aluminum die casting dies and die castings for the Automotive, Power Tools, E-pulse valves,LED Lighting housing, and numerous mechanical applications.
    Super strong oxidation resistibility and corrosion resistance Reasonable structure design and powder coating salt spray test make our die cast aluminum valve product have super oxidation resistibility and corrosion resistance.
    Aluminium Alloy Machinery CNC Die Casting Components factory,Custom Metal Components Low Pressure Die Casting Process Aluminum Alloy plant
    ASTM, DIN, GB, BS, JIS, AISI, NF Stainless steel/Aluminum/Brass Material grade: Anodize Aluminum cast products/Zinc Plating/ Nickel Plating, Tinting/ Polishing/Blacking metal oem machining supplier

  • Aluminum Casting Flanges/Enclosures

    use for HV Bushings, Surge Arresters, Hollow Insulators, Outdoor Terminations...

    Influence of Flange on Seismic Performance of 1,100-kV Ultra-High Voltage Transformer Bushing
    5 janvier 2021
    Influence of Flange on Seismic Performance of 1,100-kV Ultra-High Voltage Transformer Bushing...
    what's the Metal Material for Enclosures in HV/EHV GIS (Gas-insulated switchgear)/AIS?
    30 décembre 2020
    Artisan Industry：Power transmission/Substation transformer accessories supplier,metal products...
    Aluminum Die Casting Flanges for Terminations cable accessories
    28 novembre 2020
    Our factory specialized in producing Aluminum Corona Rings&Aluminum Flanges applicated in HV...
Cookie Use
We use cookies to ensure a smooth browsing experience. By continuing we assume you accept the use of cookies.
Learn More